Choosing an affordable autopilot no longer means compromising on quality or capability. MicroPilot’s MP0028PX combines open-source autopilot pricing with MicroPilot’s reliability and professional engineering. Take advantage of the proven upgrade path offered by the MicroPilot autopilot family. As your requirements grow, you can move up to higher-end MicroPilot autopilots while preserving your investment in configuration and integration.
As systems become more complex, drone manufacturers using open-source autopilots are often forced to modify and maintain the autopilot source code, effectively becoming autopilot software developers. MicroPilot takes a different approach. Vehicle and mission requirements can be addressed through configuration rather than by modifying source code. If custom functionality is required, MicroPilot’s experienced engineering team can implement and maintain those changes on the customer’s behalf.
Designing a drone is challenging enough without also having to develop and support autopilot software, allowing manufacturers to focus on their aircraft, payloads, and operations rather than building an autopilot software team.
MicroPilot provides an upgrade path within the MicroPilot family, helping customers move to higher-performance solutions as their aircraft, payload, or mission requirements evolve. MicroPilot offers autopilots from models that are cost-competitive with open-source options, all the way up to our triple-redundant autopilots.
Optional calibration eliminates the on-autopilot heater for temperature control, ensuring your autopilot works over a wide temperature range, improving sensor performance, and eliminating the need for periodic manual recalibration. Without the on-chip heater, sensors operate at a lower temperature, which increases MTBF.
MicroPilot uses highly accelerated life testing to find and eliminate weaknesses in our designs. Combined with the optional Environmental Stress Screen to eliminate infant mortality, this provides the ultimate in reliability.
Optional conformal coating and underfill protect your autopilot and improve its robustness. A conformal coating provides a protective layer on the circuit board, while underfill glues the chips to the circuit board rather than using solder joints to hold them in place. As an added benefit, underfill protects against whiskers that form from unleaded solder.
The optional integrated airspeed sensor, when combined with calibration, provides accurate low-noise airspeed data. Integrating the sensor into the autopilot ensures that there is no mismatch between the sensor and the calibration data stored in the autopilot.
Not just anyone can modify MicroPilot’s source code. Access is tightly controlled, and our experienced team of developers knows our autopilot code inside out. No bad actors can insert nefarious code into our code because bad actors cannot access our code.
Our XTENDER software developer’s kit lets you add your code to ours so you can implement must-have features and make your code your own. A well-defined interface between our code and yours avoids risky merges when upgrading to new versions of our autopilot code.
MicroPilot uses many high-reliability software techniques and processes, including complexity limits, avoidance of high-risk operations such as dynamic memory allocation, a simple, easy-to-understand process structure, MISRA, Doxygen headers on all functions, and C rather than more complex object-oriented languages.
Whether it is fixed-wing aircraft, helicopters, multirotors or VTOL platforms, MicroPilot’s configurable autopilot software supports all aircraft types using a single binary. No custom builds needing separate testing, no recompilation, and no need to maintain multiple firmware versions. Configure the autopilot for your aircraft and fly.
MicroPilot’s single, thoroughly tested binary eliminates the risks and repeated testing associated with recompiling software for different UAVs, hardware configurations and features.
MicroPilot support always has access to the exact software binary you fly, simplifying troubleshooting and accelerating problem resolution.
Manufacturer
MicroPilot. Inc.
Standards
FMUv6X / Pixhawk Autopilot Bus (DS-010, DS-012)
Supported Firmware
MicroPilot Professional Autopilot firmware
Country of Origin
Canada
Dimensions
36.0 × 29.0 × 5.0 mm
Weight (no airspeed sensor)
5 g
Weight (w airspeed sensor)
10 g
Power requirements
5V / 500mA (200 mA for heating resistor)
Board-to-Board Connectors
Hirose DF40C-100DP-0.4V(51) + Hirose DF40C-50DP-0.4V(51)
MCU
STM32H753IIK6
Core
ARM Cortex-M72
Clock Speed
480 MHz
Flash
2 MB
RAM
1 MB on chip plus 8 MB external
External Flash
16 MB
2x Invensense ICM-42688-P
6-axis Accel/Gyro
Invensense IIM-42652
6-axis Accel/Gyro (Industrial)
Bosch BMP390
Barometer
Bosch BMM150
3-axis Magnetometer
Optional Airspeed Sensor
with on-die temperature sensor
8x UARTs
GPS1, GPS2, etc
8x PWM (out)
Servo control
2x CAN-FD
DroneCAN / UAVCAN
1x USB
USB OTG Full Speed
1x Ethernet
100 Mbps / PHY-RMII / Magnetics on the carrier board
PPM (in)
SBUS / RC (in)
DSM / Spektrum (in)
RC input methods
1 x I2C
External I/O
Calibration
All sensors calibrated for zero, scale and alignment, including the airspeed sensor if installed.
Environmental Stress Screen
Vibration and high-rate temperature change
Environmental Protection
Conformal coating and underfill
Airspeed Sensor
Airspeed sensor with on-die temperature sensing