|
HORIZONmp | Brochure
| FAQ

The choice of over 350 clients in 51 countries, HORIZONmp
Ground Control Software offers a user-friendly point-and-click interface.
Developed by MicroPilot specifically for the MP2028 series of autopilots,
HORIZONmp runs on a Windows computer or laptop. HORIZONmp
allows the operator to monitor the autopilot, change waypoints, upload
new flight plans, initiate holding patterns and adjust feedback loop gains
all while the UAV is flying.
| Informative
Real-time flight feedback |
HORIZONmp
allows both the UAV developer and the end-user to access critical
information in real-time. Up to eight user-defined sensors can be
configured and displayed in three formats:
- Current Sensor values are displayed in an easy to read gauge
format. Warning and danger levels can be set for each gauge.
- The Strip Chart graphs sensor specific variations over
time.
- The Trace Route displays sensor data variations along the UAV's
flight path.
Data from the autopilot is also recorded for post-flight analysis.
|
| |
|
| Flexible

Superior Configurability
|
HORIZONmp
offers superior configurability for the UAV developer:
- User configurable payload buttons and sliders initiate holding
patterns and control servos
- Supports multiple laptop screen resolutions.
- Features can be enabled or disabled according to the application
and user requirements.
HORIZONmp accommodates both the end-user and the UAV
developer. |
| |
|
User Friendly

User friendly interface
|
HORIZONmp
is specifically designed for ease of use: Point and click waypoint
editor / mission planner.
- Mission simulator for testing and training purposes.
- User definable units (Imperial / Metric).
- RPV mode overrides navigation for more flexible reconnaissance.
- User friendly ergonomic layout.
Large map area.
- Extensive online help and tool tips.
The combination of the mission simulator and user-friendly design
will accelerate the learning curve for the UAV developer and simplify
roll-out to the end user. |
| |
|
Capable

|
HORIZONmp
is a proven, capable and effective tool:
- Inflight mission reprogramming.
- Joystick interface.
- Inflight gain adjustment.
- Multiple UAV profiles.
- Communication options support a wide range of radio modems.
- User definable holding patterns.
- Target altitude and speed can be changed during flight.
The combination of the MicroPilot autopilot and HORIZONmp
speeds your development time and gets your UAV off the ground quickly
and with minimum risk. Together the MicroPilot autopilot and HORIZONmp
give your UAV the capabilities it needs to exceed all expectations.
|
back to top
|